Seriea high speed cap injection moulding machine is specially designed for producing different type plastic cap for drinking bottles. We adopt high quality servo energying saving system including servo motor, gear pump, servo driver and PLC to ensure the machine running fast and stable. Also we adopt double pump system to make open mould link with ejector at the same time. It will reduce the production cycle time. This machine will be equipped with 32 cavity cap mould, minimum cycle time can reach to 4 seconds.
Seriea high speed cap injection moulding machine is specially designed for producing different type plastic cap for drinking bottles. We adopt high quality servo energying saving system including servo motor, gear pump, servo driver and PLC to ensure the machine running fast and stable. Also we adopt double pump system to make open mould link with ejector at the same time. It will reduce the production cycle time. This machine will be equipped with 32 cavity cap mould, minimum cycle time can reach to 4 seconds.
| 规格 SPECIFICATION | 单位 UNIT | JTK270S |
| 注射装置 INJECTION UNIT | ||
| 螺杆直径 Screw diameter | mm | 55 |
| 理论注射容量 Shot volume(theoretical) | cm³ | 641 |
| 注射重量 Injection weight(ps) | g | 583 |
| 注射速率 Injection rate | g/s | 440 |
| 注射压力 Injection pressure | MPa | 169 |
| 螺杆转速 Screw speed | rpm | 0~300 |
| 锁模部分 CLAMPING UNIT | ||
| 锁模力 Clamping force | KN | 2700 |
| 移动模板行程 Moving Mould-plate stroke | mm | 540 |
| 最大模厚 Max.Mould height | mm | 580 |
| 最小模厚 Min.Mould height | mm | 200 |
| 拉杆间距(宽x高) Space between tie bars(WxH) | mm | 580 x 580 |
| 液压顶出力 Hydraulic Ejector force | kN | 150 |
| 液压顶出行程 Hydraulic Ejector stroke | mm | 70 |
| 其 它 OTHERS | ||
| 最大油泵压力 Max.Pump pressure | MPa | 16 |
| 油泵电机功率 Pump motor power | kW | 40.5+12 |
| 加热功率 Heating power | kW | 16.9 |
| 外形尺寸 Machine dimension(LxWxH) | m | 5.90 x 1.60 x 2.25 |
| 油箱容量 Oiltank cubage | L | 500 |
| 机器重量 Machine weight | t | 8 |
+86 13757422856
+86 19957478300
