Adopt special design for PET material, long L/D to increase the efficiency of charging and shot weight.
Increased ejector force and stroke to improve the ejecting speed.
servo energy saving system could be chosen for machine,
electricity consumption will be reduced 30% to 50%.
we can provide full set equipment for PET bottle such as injection machine, blow moulding machine, mould and other accessories.
| 规格 SPECIFICATION | 单位 UNIT | JTZ230PETS |
| 注射装置 INJECTION UNIT | ||
| 螺杆直径 Screw diameter | mm | 55 |
| 理论注射容量 Shot volume(theoretical) | cm³ | 593 |
| 注射重量 Injection weight(ps) | g | 640 |
| 注射速率 Injection rate | g/s | 200 |
| 注射压力 Injection pressure | MPa | 138 |
| 螺杆转速 Screw speed | rpm | 0~155 |
| 锁模部分 CLAMPING UNIT | ||
| 合模力 Clamping force | KN | 2300 |
| 移动模板行程 Moving Mould-plate stroke | mm | 475 |
| 拉杆间距(宽x高) Space between tie bars(WxH) | mm | 530 x 530 |
| 最大模厚 Max.Mould height | mm | 580 |
| 最小模厚 Min.Mould height | mm | 200 |
| 液压顶出行程 Hydraulic Ejector stroke | mm | 140 |
| 液压顶出力 Hydraulic Ejector force | kN | 70 |
| 其 它 OTHERS | ||
| 最大油泵压力 Max.Pump pressure | MPa | 16 |
| 油泵电机功 Pump motor power | kW | 28.3 |
| 加热功率 Heating power | kW | 19.6 |
| 外形尺寸 Machine dimension(LxWxH) | m | 5.75 x 1.50 x 2.14 |
| 油箱容积 Oiltank cubage | L | 300 |
| 机器重量 Machine weight | t | 7 |
+86 13757422856
+86 19957478300
